Department of Labor and Regulation

Title - South Dakota Electrical Commission

Tool Box

Reference Documents and Spreadsheets

Thermal Barrier

The use of an approved thermal barrier to separate NM cable from the interior of a building is a basic requirement for the NEC. The job of a thermal barrier is to limit the temperature rise that the NM cable will be exposed to.  An approved thermal barrier is defined as 1/2-inch gypsum wallboard or the equivalent.  ASTM E 119 defines the criteria by which alternative thermal barriers are to be qualified to limit the average temperature rise of the unexposed face to 250° F for 15 minutes of fire exposure.

Before 1975, experience had shown that foam plastics covered with plaster or 1/2-inch gypsum wallboard had performed satisfactorily in building fires.  For this reason, 1/2-inch gypsum wallboard was included in the code as a minimum requirement.  It was recognized that specifying a single material would not be desirable in a performance code; therefore, the words "or equivalent" were added. The thermal barrier test was selected as the appropriate method to determine equivalent performance.  Gypsum wallboard is still the most commonly used thermal barrier, but equivalent materials per the following are permitted and have been used when shown to equivalent.  

Time Assigned to Wallboard Membranes
Description of Finish Time (minutes)

Description of Finish


3/8-inch wood structural panel bonded with exterior glue
15/32-inch wood structural panel bonded with exterior glue
19/32-inch wood structural panel bonded with exterior glue
3/8-inch gypsum wallboard
1/2-inch gypsum wallboard
5/8-inch gypsum wallboard
1/2-inch Type X gypsum wallboard
5/8-inch Type X gypsum wallboard
Double 3/8-inch gypsum wallboard
1/2-inch + 3/8-inch gypsum wallboard
Double 1/2-inch gypsum wallboard

back to top

*Opening and printing Adobe .pdf files requires Adobe Acrobat Reader. Click here as needed to download the free Adobe Acrobat Reader.

Marcia Hultman, Secretary
700 Governors Drive
Pierre, SD 57501-2291
Tel. 605.773.3101
Fax. 605.773.6184